How To Charge My Arlo Pro Camera

Download Article

Download Article

Arlo is a company that manufactures and sells home security cameras. The batteries on their devices are uncomplicated to recharge. The easiest way is connecting the photographic camera to a wall outlet with an Arlo USB adapter. If you want to charge multiple batteries at once, use an Arlo power station. If you go through all the necessary steps only your battery won't accuse, there are a few troubleshooting options you tin can effort to successfully accuse your camera.

1. 1

   Move the camera within if you're using information technology outside. Fifty-fifty if yous have a power outlet outside, don't charge the battery outdoors. Bring it inside before plugging it in to charge.^[one]

   • Cull a safe spot to charge the photographic camera where it won't exist disturbed or stepped on. A countertop or table works best. Don't charge the camera on the floor unless it's an out of the way spot.

2. 2

   Plug the USB charging cable into the camera and wall power adapter. The charging cable has 2 sides. The smaller side plugs into the back of the camera. Flip the photographic camera around and discover the slot for the plug. And so plug the larger side of the cable into the wall adapter.^[2]

   • Just utilise Arlo products to accuse the battery. Other power units and cables won't work and could damage the photographic camera or battery.

   Advertisement

3. iii

   Plug the wall power adapter into a wall socket. When the bombardment is connected properly, the LED light on the camera blinks blueish. Look for this blinking. Then leave the camera to charge.^[3]

   • If the blinking annoys you, plow the camera around or comprehend it with a towel while it charges.
   • If the light doesn't glimmer, check your connection. Make sure all the plugs are fully inserted.

4. 4

   Unplug the photographic camera when the LED low-cal turns solid bluish. When the bombardment is fully charged, the blueish light stops blinking and turns solid. Monitor the camera and unplug it when you see the solid blue low-cal. And then reinstall the camera where information technology was originally.^[4]

   • Arlo camera batteries take 2-4 hours to charge, depending on how low the battery was. Don't unplug information technology before the light turns solid or you'll have an incomplete charge.

Advertisement

1. 1

   Plug in the Arlo charging station. The charging station comes with a USB cable and a wall adapter. Plug the pocket-size side of the cable into the charging station and the large side into the adapter. And so plug the wall adapter into an outlet.^[5]

   • An Arlo power station comes separately from the cameras and base stations. You tin can get one from an electronics shop or online. Remember that batteries aren't included with the power station. You only get the charging port, cable, and wall power adapter.
   • Make sure the power station is in a safety place where it won't get knocked over or stepped on.
   • Simply use Arlo products to charge the ability station. Other USB cables won't work properly.

2. 2

   Open the bombardment compartment on the photographic camera. Look for a pocket-size latch on the height of the photographic camera. Press the latch down with your finger to unlock the battery compartment. While belongings the latch, apply your other paw to lift upwardly the height part of the camera and reveal the battery.^{[half dozen]}

   • Agree onto the camera firmly while opening the compartment. Information technology could skid out of your easily and break.

3. three

   Press downward the latch belongings the bombardment in place and slide it out. The battery is held in place with a small latch. Press information technology down to free the battery. So slide the battery out of the compartment.^[7]

4. 4

   Slide the battery into the charging bay until it clicks. The power station has 2 charging bays, ane on each side. Have the battery and line it up with the grooves on the charger. Insert its back side (the black part) into the bay. Press until yous hear a click, significant the battery is locked in identify. ^[8]

   • Make sure the Arlo symbol is facing up on the battery. That'southward how you know the battery is facing the right direction.
   • Insert another battery into the other side if you want to accuse 2 at the aforementioned time.

5. 5

   Leave the battery in until the LED light turns solid light-green. While the battery is charging, the LED low-cal will be solid yellow. When it turns solid green, the bombardment is charged and you lot can remove it.^[9]

   • The power station has a calorie-free for each battery. Await at the light closest to the battery to brand sure you lot're checking the right one.
   • The bombardment will accept 2-4 hours to accuse, depending on how low the charge was.
   • If the LED blinks yellowish, information technology means the battery is inserted just isn't charging. Try removing the bombardment and reinserting it, making sure the grooves are all lined up properly.

6. half dozen

   Remove the battery past pressing it until it clicks. The click means the battery is free. And then slide it out carefully and insert it back into the camera.^[10]

   • Don't lift the ability station when y'all remove the battery. Information technology could fall out and break.

Advertisement

1. one

   Bank check that your attachments are tight. All the plugs you lot insert should exist snug. If your battery won't charge, check each attachment. Brand certain the wall adapter is in the outlet, and the USB cable is connected to the adapter and charging unit.^[11]

   • Effort removing the cables and wiping off all the connexion points with a dry out rag. Sometimes dust prevents a practiced connection. And so plug everything back in.

2. 2

   Brand sure y'all're using Arlo equipment. The batteries and power station won't work without Arlo cables and adapters. Your all-time bet is using the equipment that came with your camera or power station. These were manufactured and packaged past Arlo. If you bought pieces separately, look for the Arlo logo on them.^[12]

   • If you buy replacement cables and adapters from another seller, check for the Arlo logo on them. As well look for a lightning bolt logo, which is the QC ii.0 icon, and an output listed at 9V===ane.1A. These are all indications of Arlo-canonical adapters.
   • If you're using the same cables and adapters that came with your production, so the equipment may be defective. Contact Arlo for further assist or a replacement. Their 24-hour technical help number is (408) 638-3750, or yous can visit the Contact section on their website at https://www.arlo.com/en-usa/online-store/contact-us.aspx##targetText=For%20technical%20support%20or%20warranty,24-hour interval%2C%207%20days%20a%20week.

3. iii

   Log into your Arlo business relationship and see if the charging icon is at that place. If you're trying to charge the battery and the LED isn't lighting up, the light may be defective. Confirm if the camera is charging by logging into your Arlo account. If you encounter the charge icon on the homepage, the photographic camera is charging. If non, then something is wrong with the connectedness.^[13]

   • This option simply works if you're charging your battery while it's notwithstanding in the camera. It won't work if you lot're using the power station.

4. 4

   Reset your photographic camera to its factory settings. Sometimes a software issue prevents the camera from charging. Take your Arlo base station and find the Reset button on the back. Press that button in with a pen or paperclip and hold it for 10 seconds. The LED will then flash yellow, and the system reboots. This resets the organisation to its default settings. When the LED turns solid green, set up your camera again.^[14]

   • Subsequently the base station reboots, select New System Setup from your online Arlo account. Follow the steps to reconnect the camera to your WiFi.
   • If your bombardment however won't accuse, contact Arlo for farther back up.

Ad

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

Virtually This Commodity

Thank you to all authors for creating a page that has been read 15,265 times.

Did this commodity help you?

Source: https://www.wikihow.com/Charge-Arlo-Batteries

Posted by: upshawwishoune1988.blogspot.com

Share this post